Atwood Or Suburban Water Relief Valve Half Inch
THESE FIT ALL RV WATER HEATERS WITH THE 1/2 INCH HOLE
Protects The Heater From Excessive Temperatures And Water Pressures. Available In Two Sizes.
This Is Factory Set At 150 PSI & 210 Degrees Fahrenheit
NOTE: If Your Valve Is Weeping, It Does Not Mean It Definitely Requires Replacing. You May Have Lost The “Air Space” At The Top Of The Tank. With The Pump Off, Drain The Tank And Refill It Using The Taps To Bleed. This Will Reintroduce The Air Space At The Top Of The Tank. If It Still Leaks, Replace The Valve. The Air Space Is Needed As A “Shock Absorber” And To Allow Some Expansion Of The Water As It Heats Up. Do Not Be Tempted To Lift The Lever On The Water Valve As This Is How The Air Is Lost. If You Have Lifted The Valve Lever (To Reset It) You MUST Drain The Heater And Refill As Described Above. See Our Anode Rods To Service Your Boiler.
We Also Have:
Thermocouples And Pilot Assembles
Burner Tubes
Drain Bungs
Sacrificial Anode Rods
Ignition Boards
Thermostat Pack All Spares For Atwood And Suburban Water Heaters
WE SELL MANY ATWOOD / SUBURBANC REPLACEMENT PARTS, IF YOU REQUIRE FURTHER INFORMATION PLEASE CALL!
FOR THE 3/4 INCH VERSION PLEASE SEE LINKED PRODUCT BELOW!
WE HAVE MANY MORE RV PARTS AND ACCESSORIES, FROM FILTRATION, STEERING AND SUSPENSION ITEMS TO TOILETS, AWNINGS, ROOF VENTS & SANITATION PRODUCTS,
SEARCH MOBILE RV MAINTENANCE ON LINE
WE ALSO PROVIDE A MOBILE FITTING & REPAIR SERVICE.